SMT POGO PIN
1) Over 12 years' experience in manufacturing pogo pin
connector,and we own 12 items national patent of spring contacts
.The highest life test has up to1000,000 cycles, can custom various
shapes,small structure and high current (2-20A).
2) Our factory has been accredited the ISO9001:2008,ISO14001
certificate,spring loaded connector accord with HF, RoHS,Reach
standard.
3) 100% electrical test provided on function before delivery.
4) We believe that: “Quality to win markets, improvement to win
progress”. Welcome customers all over the world come to our factory
to give guidance for development!
Features of SMT POGO PIN:
- Ball strucutre to protect spring from high current.
- Thru-hole tail for secure soldering.
- Solder-cup tail for wire attachment. (Recommended AWG19 or
greater)
- Available 2A per pin
- Working Height: 2.5mm ~ 8.3mm
- Spring Force: 0.9N or 1.08N
- Tube Bottom Diameter: 1.8mm ~ 2.5mm
Brief Introduction of SMT POGO Pin :
Pogo Pin is spring loaded probe which is made by precision
instruments with riveting workmanship. It usually consists of
plunger, tube and spring. Pogo pin is generally applied in the
precision connection inside the electronics products such as mobile
phones, communication devices, automotive, medical devices,
aerospace devices and so on. Since pogo pin is very fine probe, it
can make the finished connector light in weight, small in size and
exquisite in look when it’s applied in a precision connector.
Structural Features of SMT POGO PIN
With ball structure: The ball inside allows more buffer, so result
in a even more reliable connection.
Bias structure: The biased tail of the plunger creates a lateral
force, so further improves the contact.
Back drill structure: The back drilled plunger increases the space
for the spring, so allows a shorter pogo pin for tight space.
- Pogo Pin is to realise the connection between Board to Board
- Pogo pin usually has vertical connection and right angle connection
- Pogo pin is also to realise the connection between cable and device
Pogo pin Materials
| Parts | Materials | Surface treatment | Hazardous substances | Remarks |
| Plunger | C3604 | Ni1.4u~3.75u Au 0.4u | Lead is less than 4%, RoHS compliants | Forming Process C3604 for Lathe Tuming Maching |
| Tube | C3604 | Ni 1.4i~3.5u Au 0.1u | Lead is less than 4%, RoHS compliants | |
| Spring | SUS304 | N/A | | |
| Housing | PA46 LCP HPPA | N/A | Halogen free material | fire-protection rating UL94V-0 |
| Cap | PA46 HPPA | N/A | Halogen free material | fire-protection rating UL94V-0 |
Comparison of different structure of SMT POGO Pin
| Structure | Contact Impedance | Space saving | Amperage carrying | Reliability |
| A, With ball structure | ★★★★★ | ★★★☆☆ | ★★★★★ | ★★★★★ |
| B, Bias structure | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★☆ |
| C, Back drill structure | ★★☆☆☆ | ★★★★★ | ★★☆☆☆ | ★★☆☆☆ |
Basic Specifications of SMT POGO Pin:
| ITEM | PERFORMANCE | NOTE |
| Rated voltage | Less than 36 Volte Dc | |
| Rated current | 2.0 Amperes | continuous per pin |
| Working temperature | -40 °C to 85 °C | |
| Storage temperature | -40 °C to 85 °C | |
| Woring environment humidity | 10% R.H. to 90% R.H. | |
| Durability | static testing 500,000 cycles,
dynamic testing 10,000 cycles | life cycle |
| Contact impedance | 30m ohm Max. | the contac impeance should be lower than 30m ohm during the whole
working stroke,so it's dynamic contact impedance, not contact
impedance in a certain point |
| PIN interval impedance | 500M ohm Min. | pogo pin connector |
| ITEM | Performance | Note |
| Rated Current | 2A | - |
| Rated Voltage | AC/DC 12V | - |
| Contact Resistance | 50mΩmax (stillness)
(At factory shipment) | 100mΩ after 100 times operation
(After Durability test at
Yokowo Regulation) |
| Insulation Resistance | 100MΩ (Min) | DC500V |
| Withstand Voltage | AC500V 1Min | Leak Current 3mA |
| Ambient Temp. | -40℃~+85℃ | - |
| Pin Force | 9.8N on a Pin from any direction | - |
| Pin Holding Strength | 4.9N on a Pin from axis direction | - |
| Cycle Durability | 20,000 times | Working Height |
| Temp./Humidity Cycle Test | Fig. 1 | JIS C60068-2-38 |
| Mechanical Shock Durability | 490m/s² | JIS C60068-2-27 |
| Soldering Temp. | 350℃ 3sec | Soldering Iron |
| Reflow Temp. | Fig.2 | - |
Basic Dimensions of SMT POGO Pin:
| ∅ A | B | C | D | E | FORCE(GF) | PART NUMBER |
| 1.20 | 0.60 | 1.45 | 1.95 | 1.60 | 35gf Min | 20101011233 |
| 2.00 | 0.40 | 2.20 | 3.00 | 2.40 | 90 Min | 101245-1 |
| 1.80 | 0.50 | 2.30 | 3.00 | 2.50 | 90 Min | 10101011363 |
| 1.65 | 0.40 | 2.20 | 3.00 | 2.50 | 90 Min | 101089-1 |
| 1.65 | 0.40 | 2.20 | 3.00 | 2.50 | 90 Min | 101603-1 |
| 1.65 | 0.60 | 2.40 | 3.20 | 2.70 | 90 Min | 101022-1 |
| 1.80 | 0.40 | 2.50 | 3.30 | 2.80 | 90±20 | 101080-1 |
| 2.00 | 0.40 | 2.50 | 3.30 | 2.80 | 90±20 | 101121-1 |
| 2.00 | 0.40 | 2.50 | 3.50 | 2.80 | 100±35 | 101281-1 |
| 2.00 | 0.40 | 2.50 | 3.50 | 2.90 | 100±30 | 101009-1 |
SMT POGO Pin
| Type | Working
Height | Spring
Force | Rated
Current | A | B | C | D | E | F |
| 2307 | 2.5 | 0.9N | 2A | 2.3 | 0.7 | 2.5 | 0.5 | 1.8 | 2.4 |
| 2509 | 2.8 | 0.9N | 2A | 2.5 | 0.9 | 2.8 | 0.6 | 1.8 | 2.4 |
| 2809 | 3.1 | 1.08N | 2A | 2.8 | 0.9 | 3.1 | 0.6 | 1.8 | 2.4 |
| 2910 | 3.2 | 1.08N | 2A | 2.9 | 1.0 | 3.2 | 0.7 | 1.8 | 2.4 |
| 3111 | 3.4 | 1.08N | 2A | 3.1 | 1.1 | 3.4 | 0.8 | 1.8 | 2.4 |
| 3212 | 3.5 | 1.08N | 2A | 3.2 | 1.2 | 3.5 | 0.9 | 1.8 | 2.4 |
| 3413 | 3.8 | 1.08N | 2A | 3.4 | 1.3 | 3.8 | 0.9 | 2.0 | 2.6 |
| 3614 | 4.0 | 1.08N | 2A | 3.6 | 1.4 | 4.0 | 1.0 | 2.0 | 2.6 |
| 3915 | 4.4 | 1.08N | 2A | 3.9 | 1.5 | 4.4 | 1.0 | 2.0 | 2.6 |
| 4215 | 4.7 | 1.08N | 2A | 4.2 | 1.5 | 4.7 | 1.0 | 2.5 | 3.1 |
| 4617 | 5.2 | 1.08N | 2A | 4.6 | 1.7 | 5.2 | 1.1 | 2.5 | 3.1 |
| 5117 | 5.7 | 1.08N | 2A | 5.1 | 1.7 | 5.7 | 1.1 | 2.5 | 3.1 |
| 5517 | 6.1 | 1.08N | 2A | 5.5 | 1.7 | 6.1 | 1.1 | 2.5 | 3.1 |
| 5920 | 6.6 | 1.08N | 2A | 5.9 | 2.0 | 6.6 | 1.3 | 2.5 | 3.1 |
| 6220 | 6.9 | 1.08N | 2A | 6.2 | 2.0 | 6.9 | 1.3 | 2.5 | 3.1 |
| 6520 | 7.2 | 1.08N | 2A | 6.5 | 2.0 | 7.2 | 1.3 | 2.5 | 3.1 |
| 7025 | 7.8 | 1.08N | 2A | |
